TM 5-3810-306-20
WINDSHIELD WASHER VALVE INSTALLATION
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Wheels are chocked.
Disconnect ground cable at shunt. (Refer to page 8-109.)
Air system is purged. (Refer to page 11-2.)
Side console rear access panel removed. (Refer to page 8-21.)
REMOVAL:
1.
REMOVE WINDSHIELD WASHER VALVE (5).
a.
Tag and disconnect two air lines (1) from bottom
of valve (5).
b.
Pull knob (2) off valve (5).
c.
Remove nut (3) and washer (4), and pull
windshield washer valve (5) out bottom of side
console.
INSTALLATION:
1.
INSTALL WINDSHIELD WASHER VALVE (5).
a.
Install windshield washer valve (5) in side
console and secure with nut (3) and washer (4).
b.
Push knob (2) onto valve (5).
c.
Connect two air lines (1) to bottom of valve (5)
as tagged.
2.
INSTALL SIDE CONSOLE REAR ACCESS PANEL.
(REFER TO PAGE 8-21.)
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
4.
START-UP ENGINE AND ALLOW AIR PRESSURE
TO BUILD UP. CHECK WINDSHIELD WASHER
VALVE FOR PROPER OPERATION. (REFER TO
TM 5-3810-30610.)
END OF TASK.
11-39
