TM 5-3810-306-20
Section II. FRONT STEER RELIEF VALVE MAINTENANCE
FRONT STEERING RELIEF VALVE REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
Clean rags (Item 1, Appendix C)
Lockwashers (Item 15, Appendix C)
EQUIPMENT CONDITION:
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE STEERING RELIEF VALVE (1).
a.
Tag and remove three hydraulic hoses to
steering relief valve (1). Plug hoses.
b.
Remove two capscrews (2), lockwashers (3)
and nuts (4) securing valve to frame. Discard
lockwashers (3).
c.
Remove fittings. Retain for installation or
replace if damaged.
d.
Inspect hydraulic hose seals fol damage.
Replace if necessary.
INSTALLATION:
1.
INSTALL STEERING RELIEF VALVE (1).
a.
Install fittings on new valve.
b.
Align steering relief valve (1) with frame
mounting holes and secure with two capscrews
(2), new lockwashers (3) and nuts (4).
c.
Remove tags, plugs and install hydraulic hoses.
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3
START ENGINE AND CHECK FRONT STEERING
OPERATION. (REFER TO TM 53810-306-10.)
END OF TASK
13-4
