TM 5-3810-306-20
OPERATOR SEAT ASSEMBLY
TOOLS:
General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
Lockwashers (Item 40, Appendix C) (4 Required)
EQUIPMENT CONDITIONS: Operator seat removed. (Refer to page 15-27.)
REMOVAL:
1.
REMOVE OPERATOR SEAT (1).
a. Loosen four capscrews (2), hex nuts (4),
lockwashers (3) and bell washers (6) to remove
operator seat (1) from seat pedestal plate (5).
Discard lockwashers (3).
b. Lift operator seat (1) from seat pedestal plate
(5).
INSTALLATION:
1.
INSTALL OPERATOR SEAT (1).
a. Install operator seat (1) over bell washers (6) on
seat pedestal plate (5). Align holes and secure
with four capscrews (2), new lockwashers (3)
and hex nuts (4).
2.
INSTALL SEAT. (REFER TO PAGE 15-27.)
END OF TASK
15-29
