TM 5-3810-306-20
c. Remove seat pedestal.
3.
INSPECT SEAT BELT BUCKLE AND BELT
FABRIC FOR WEAR OR DETERIORATION.
REPLACE IF REQUIRED.
4. INSPECT
ALL
PARTS
FOR
DAMAGE.
REPLACE PARTS AS REQUIRED.
INSTALLATION:
1.
INSTALL PEDESTAL ASSEMBLY AND SEAT
BELT.
a. Align seat pedestal (10) with cab floor holes and
install bushings (6). Secure with four capscrews
(9), flatwashers (7) and new lockwashers (8).
b. Install seat belt (1) to cab floor with capscrew
(2), new lockwasher (4), flatwasher (3) and hex
nut (5).
2.
INSTALL OPERATOR SEAT.
a. Install shaft on bottom of seat in socket on
pedestal.
b.
Adjust seat for desired height and install height
adjusting pin (16) and clip pin (15).
c. Tighten adjusting knob (14) to eliminate play on
seat shaft.
d. Install seat belt (1) to seat suspension with
capscrews (13), new lockwashers (12) and nuts
(11).
3.
CHECK SECURITY OF ALL COMPONENTS.
4.
INSTALL CAB BOTTOM PANEL. (REFER TO
PAGE 15-11.)
END OF TASK
15-28
