TM 5-3810-306-20
WINDSHIELD WIPER MOTOR REPLACEMENT
TOOLS:
General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Cab front panel removed. (Refer to page 15-10.)
REMOVAL:
1.
REMOVE WIPER MOTOR (1).
a. Tag and disconnect three electrical leads to
wiper motor (1).
b. Remove clip securing crank arm (2) to wiper
motor (1) and pivot adapter (5).
c. Remove nut (7) and washer (6).
d. Remove three capscrews (4) securing wiper
motor (1) to mounting bracket (3).
INSTALLATION:
NOTE
Apply loctite to capscrew (4) threads
before installing wiper motor (1).
1.
INSTALL WIPER MOTOR (1).
a. Install wiper motor (1) using three capscrews (4).
b. Attach crank arm (2) to wiper motor (1) with
washer (6) and nut (7). Secure adapter (5) with
clip.
c. Remove tags and connect three electrical leads
to wiper motor (1).
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
TEST FOR PROPER OPERATION. (REFER TO
TM 5-3810-306-10.)
4.
INSTALL CAB FRONT PANEL ON CAB. (REFER
TO PAGE 15-10.)
END OF TASK
15-42
