TM 5-3810-307-10
d.
Set the LMI panel for the proper operating mode. If necessary, refer to
e.
Extend and set the outriggers. Refer to paragraph 5-7.4.
f.
Raise, lower, and swing the boom right and left a minimum of 45 degrees.
Refer to paragraphs 5-7.7, 5-7.8, and 5-7.6.
g.
Telescope the boom in and out. Refer to paragraphs 5-7.9 and 5-7.10.
h.
Raise and lower the hoist rope a few times at various boom lengths. Check
for kinks in the wire rope. Refer to paragraphs 5-7.11 and 5-7.12.
5-7.3
Using Load Chart.
NOTE
In addition to the load chart, the crane is equipped
with a Load Moment Indicating (LMI) system to aid
the operator in craning operations, refer to Appendix
NOTE
One of the most important tools of every crane is the
load chart found in the operator's cab. Refer to
Figure 5-7 as required.
The load chart contains a large amount of information, which must be thoroughly
understood by the operator.
5-78
