TM 5-3810-307-24-1-1
PANEL LIGHT DIMMER CONTROL (SUPERSTRUCTURE CAB)
Removal
a.
Ensure battery disconnect switch is in OFF position.
b.
Tag and disconnect electrical leads from rheostat (4, Figure 2-14-10).
c.
Loosen screw (part of knob). Then remove knob (1), nut (2), washer (3), and rheostat (4) from dash panel.
Installation
a.
Position rheostat (4, Figure 2-14-10) in dash panel and secure with washer (3) and nut (2).
b.
Install knob (1) on stem of rheostat (4). Tighten screw (part of knob).
c.
Connect electrical leads to rheostat (4) and remove tags.
LEGEND
1.
Knob
2.
Nut
3.
Washer
4.
Rheostat
2-14-23
