TM 5-3810-307-24-1-1
b.
Install turn signal LED clusters as follows:
(1)
Position panel (19, Figure 2-14-11), gasket (18), and LED cluster (17) in dash panel. Ensure arrow on
diode is pointing up.
(2)
Secure panel (19), gasket (18), and LED cluster (17) with screws (16), washers (15), lockwashers (14),
and nuts (13).
(3)
Connect electrical leads, remove tags, and install access panel on top of dash panel.
c.
Install rear steer light strip as follows:
(1)
Position light strip (11, Figure 2-14-11) near dash panel, connect electrical leads, and remove tags.
(2)
Position panel (12) and light strip (11) in dash panel and secure with screws (10), washers (9),
lockwashers (8), and nuts (7).
d.
Install main alert light strip as follows:
(1)
Position panel (6, Figure 2-14-11) and light strip (5) in dash panel and secure with screws (4), washers
(3), lockwashers (2), and nuts (1).
(2)
Connect electrical leads, remove tags, and install access panel on top of dash panel.
2-14-25
