TM 5-3810-307-24-1-1
BACKUP ALARM (CARRIER)
Removal
a.
Ensure battery disconnect switch is in the OFF position.
b.
Disconnect backup alarm (6, Figure 2-14-13) electrical connector from carrier electrical harness.
c.
Remove nuts (1), lockwashers (2), washers (3), capscrews (4), washers (5), and backup alarm (6) from carrier
frame.
Installation
a.
Insert capscrews (4, Figure 2-14-13) with washers (5) through holes in carrier frame.
b.
Position backup alarm (6) over capscrews (4) and install ground wire on capscrew (4) on terminal side of
backup alarm.
c.
Secure backup alarm (6) to carrier frame with washers (3), lockwashers (2), and nuts (1).
d.
Connect electrical connector to carrier electrical harness.
LEGEND
1.
Nut
3.
Washer
5. Washer
2.
Lockwasher
4.
Capscrew
6. Backup alarm
2-14-28
