TM 5-3810-307-24-1-1
INDICATOR LIGHTS (CARRIER CAB)
Removal
a.
Ensure battery disconnect switch is in OFF position.
b.
Remove main alert light strip as follows:
(1)
Remove access panel from top of dash panel.
(2)
Tag and disconnect electrical leads from LED clusters (21, Figure 2-14-11).
(3)
Remove nuts (1), lockwashers (2), washers (3), screws (4), light strip (5), and panel (6) from dash panel.
c.
Remove rear steer light strip as follows:
(1)
Remove nuts (7, Figure 2-14-11), lockwashers (8), washers (9), screws (10), light strip (11), and panel
(12) from dash panel.
(2)
Tag and disconnect electrical leads from LED clusters (21).
d.
Remove turn signal LED clusters as follows:
(1)
Remove access panel from top of dash panel.
(2)
Tag and disconnect electrical leads from LED cluster (17, Figure 2-14-11).
(3)
Remove nuts (13), lockwashers (14), washers (15), screws (16), LED cluster (17), gasket (18), and
panel (19).
e.
Remove LED clusters from light strips as follows:
NOTE
LED clusters are different colors depending on purpose of indicator light.
Mark position of each LED cluster to light strip to ensure correct colored
cluster is reinstalled.
(1)
Remove capscrews (20) securing each LED cluster to light strip (5 or 11) as applicable.
(2)
Remove LED cluster (21) and gasket (22) from light strip.
Installation
a.
Install LED clusters on light strips as follows:
(1)
Position gasket (22, Figure 2-14-11) and LED cluster (21) on light strip (5 or 11) as applicable. Ensure
arrow on diode is pointing up.
(2)
Secure LED cluster (21) and gasket (22) with capscrews (20).
2-14-24
