SM02-025-0
Page 40
87. Remove the auxiliary pump gear support
90.
Holding the ring open, tap the turbine shaft
screws and lockwashers.
from the stator support.
88. Remove the auxiliary pump gear, bearing, and
91.
Remove the stator support screws and support.
support.
Cleaning.
WARNING
Exercise care to avoid skin rashes,
fire hazards, and inhalation of vapors
when using solvent-type cleaners.
Clean all parts thoroughly using a solvent type clean-
ing fluid. It is recommended that the parts be
immersed in cleaning fluid and washed up and down
slowly until all old lubricant and foreign material is
dissolved and the parts are thoroughly cleaned.
89.
Spread the turbine shaft bearing locating ring.