SM02-025-0
Page 53
/
60. Position a new gasket on the idler shaft bearing
58. Position a new O-ring and gasket on the 1st and
cap. Install the bearing cap, bolts and lockwashers.
2nd clutch rear bearing cap.
tighten to the torque specified in the Torque Chart.
61. Set the output shaft rolling torque. Refer to
Output Shaft Rolling Torque Procedure.
62.
Install the parking brake assembly.
59. Position the bearing cap on the clutch shaft.
Install the bolts and lockwashers, tighten to the
torque specified on the Torque Chart.
63. Position the 3rd and 4th speed clutch disc hub
on the 1st and 2nd clutch shaft.