SM02-025-0
Page 55
70.
Install the ring retainer retainer ring.
73. Position new O-rings and gasket on the front of
the transmission housing. A light coat of chassis
grease will hold the O-rings and gasket in place.
71.
Install the front output flange O-ring. washer,
and nut. Torque the flange nut 200 to 250 pounds-
foot (27.1 to 33.8 kgm).
74.
Position the pilot bearings on the 3rd, 4th, 5th
and 6th clutch shafts, a light coat of grease will hold
the pilot bearings in place.
72.
Install the forward clutch pilot bearing.