SM02-025-0
Page 60
92. Position a new shuttle valve gasket on the con-
94. Connect the pressure line from the shuttle
trol valve. Install the shuttle valve assembly on the
valve to the control valve. Connect the wires from the
control valve.
control valve to the shuttle valve solenoid.
NOTE
95. Using a new gasket, position the charging
pump assembly on mounting studs. Install the
Use Loctite #262 on upper right hand
washers, nuts and capscrews. Torque the nuts and
screw. Torque the screws to the value
capscrews to the value specified in the Torque Chart.
specified in the Torque Chart.
93. Install the control valve to housing screws and