SM02-027-0
Page 16
10. Position the impeller hub bearing spacer on the
12.
Install the outer race to reaction member re-
stator support.
tainer ring.
NOTE
13.
For a fixed reaction member, install the reac-
tion member with the thick side of the blades out. For
The freewheel assembly cannot be ser-
a freewheeling reaction member, install the reaction
viced. If the freewheel is damaged it
member with the thick side of the blades out.
must be replaced as an assembly.
11.
Install the outer race and sprag assembly into
the reaction member. The undercut shoulder of the
race must go toward the rear of the reaction member.
