SM03-026-0
Page 21
AXIAL CLEARANCE ADJUSTMENT.
CAUTION
When tightening the counter nut, the ,
adjusting screw must be held in pos-
ition to prevent it from being screwed
in further.
2. Block the adjusting screw and the counter nut with
LOCTITE 270.
PLANETARY GEARS.
Disassembly.
1. The adjustment is made after mounting the planetary
gear housing onto the wheel hub by screwing in the
adjusting screw (12) until it touches the surface of the axle
o
shaft. Back off the adjusting screw 72 to 17 0 from the
tightened position. This is approximately 0.118 to 0.276 in.
(0.3 to 0.7 mm).
