SM03-026-0
Page 24
4. Ensure the axle housing is in a horizontal position.
7. Remove the shaft radial seals (8) and support disk if
Remove the complete differential assembly including the
present.
differential lock system from the axle housing.
8. Remove the retaining ring (7) securing the needle
bearings into the knuckle and remove the outer ring and
needle bearings (6).
5.
Remove the lock rings, seals, and needle bearings.
6.
Remove the main lip seals and the anti-dust lip seal.
9. If necessary, remove the upper bearing socket (5)
from the steering knuckle bore.
