TM 5-3810-307-24-2-2
Oil Cooler - Installation (0-84)
CAUTION
If a new element is to be installed, be sure to
remove the shipping plugs.
Insert two capscrews through the oil cooler cover.
Package the cooler cover gasket, oil cooler, oil cooler
gasket and oil cooler cover.
10 mm
Install the "package" on the cylinder block.
[18 ft-lb]
Side Oil Fill - Installation (0-85)
15 mm
If the engine is so equipped, install the side oil fill
assembly and o-ring.
[32 ft-lb]
Fuel Transfer Pump - Installation
(0-86)
CAUTION
When installing piston style transfer pumps,
alternately tighten the mounting capscrews.
As the capscrews are tightened, the transfer
pump plunger is pushed into the pump.
Failure to tighten the capscrews in an even
manner can result in the plunger being bent
or broken.
Install the fuel transfer pump, gaskets and spacer if
using a piston style pump.
[18 ft-lb]