TM 5-3810-307-24-2-2
Front Cover - Installation (0-98)
Lubricate the front gear train with clean engine oil.
CAUTION
The seal lip and the sealing surface on the
crankshaft must be free from all oil residue to
prevent seal leaks.
Thoroughly clean and dry the front seal area of the
crankshaft.
3824498 Installation Tool
Leave the plastic pilot installation tool in the
lubricating oil seal.
Position the seal on the service tool, Part No.
3824499, with the lubricating oil seal dust lip facing
outward.
NOTE
Properly support the front cover lubricating oil
seal flange to prevent damage to the
lubricating oil seal and front cover.
Press the lubricating oil seal into the front cover from
the back side of the cover toward the front side of
the cover.
Press the lubricating oil seal until the service tool
bottoms against the front cover.
