TM 5-3810-307-24-2-2
Flywheel Housing - Installation (0-
95)
If removed, install the two ring dowels.
Drive the dowels in until they are against the bottom
of the bore.
Install the rectangular seal and lubricate with
Lubriplate 105.
15 mm
Install the flywheel housing.
Torque Value: 77 Nm
[57 ft-lb]
Flywheel - Installation (0-96)
Install the flywheel.
CAUTION
Install two capscrews in the front of the
crankshaft or otherwise lock the crankshaft to
tighten the flywheel capscrews. Do not use
the timing pin to lock the engine.