TM 5-3810-307-24-2-2
If the drain tube in the block was removed, apply
sealant, Cummins P/N 3375068, Loctite P/N 24231, or
NSN 8030-01-014-5869 to the sealing surfaces.
NOTE
See Sealants information in TM 5-3810-307-
24-2,-1, page V-17.
22 mm Open End Wrench, Hammer
Install the tube in the block so it is aligned with the
turbocharger drain tube.
Screwdriver
Position the turbocharger drain hose to connect the
drain tubes; tighten the clamps.
13 mm
If loosened, tighten the turbocharger turbine housing
capscrews.
Torque Value: 20 Nm
[15 ft-lb]
0-83 C-1