TM 5-3810-307-24-2-2
Belt Tensioner - Installation (0-120)
5 mm Allen
Install the tensioner bracket to the cylinder head.
Tighten the socket head screws.
Torque Value: 24 Nm
[18 ft-lb]
13 mm
Position the belt tensioner on the bracket and secure
it with the capscrew.
Torque Value: 43 Nm
[32 ft-lb]
NOTE
Some tensioners can be bolted to two
different locations on the bracket. Install into
the location dictated by your requirement.
Water Inlet Connection - Installation
(0-121)
CAUTION
Do not tighten at this time. To avoid
misalignment and overstressing the lower
support mounting ear on the alternator, leave
the capscrews loose until all the alternator parts
are installed.
Install the water inlet connection and sealing ring.
Alternator - Installation (0-122)
10 mm
Assemble the alternator bracket to the thermostat
housing.
Torque Value: 24 Nm [18 ft-lb]
