TM 5-3810-307-24-2-2
CAUTION
The Turbocharger must be prelubricated.
Pour 50 to 60cc [2 to 3 oz.] of clean engine oil into the
oil inlet fitting on top of the turbocharger while spinning
the turbocharger impeller to distribute the oil in the
bearing.
16 mm and 19 mm
Install the oil supply line.
Tighten the fittings securely.
Torque Value: 15 Nm
[11 ft-lb]
35 Nm
[26 ft-lb] (on turbocharger)
Connect the aftercooler coolant supply tube (1) and the
coolant return tube (2).
Thermostat - Installation (0-117)
"Package" the lifting bracket and thermostat gasket to
the thermostat and thermostat housing. Position the
rubber seal as shown.