TM 5-3810-307-24-2-2
Drive Belt - Installation (0-123)
3/8 inch Square Drive
Lift the tensioner and install the belt.
Service Tip: If difficulty is experienced installing the
drive belt (the belt seems too short), position the belt
over the grooved pulleys first and then while holding the
tensioner up, slide the belt over the water pump pulley.
Oil Filter - Installation (0-124)
Lubricate the filter seal and tighten the filter according to
the filter manufacturer's instructions.
Be sure to use the correct filter for your engine.
Fleetguard LF3349, Grove P/N 6908615 [9-414-100813
(12361)], or NSN 2940-01-280-8419 (all are
interchangeable).
Rollover Stand - Engine Removal
(0-125)
18 mm
Install the rear lifting bracket.
Torque Value: 77 Nm [57 ft-lb]
Remove the engine from the rollover stand.
Engine Weight
6B engine (wet) weight: 410-440 Kg [910-970 lb]
