TM 5-3810-307-24-2-2
3. Do not operate the engine at rated speed (RPM)
and full load for more than 5 minutes at any one time.
Engine - Painting (14-08)
Remove all belts from the engine.
Cover the following parts of the engine:
Exhaust and intake openings
Electrical components
Fuel inlet and drain connections
Any exposed fittings, threads, and electrical wire
terminals
WARNING
When using a steam cleaner, wear protective
clothing and safety glasses or a face shield.
Hot steam can cause serious personal injury.
Use steam to clean the engine, and dry with
compressed air.
NOTE
Make sure all engine surfaces are clean and
dry before painting the engine.
Protect the following components from the paint:
All dataplates
Valve and injector set marks.
Exhaust manifold
Turbocharger turbine housing
Flywheel
Flywheel housing transmission mounting surface