TM 5-3810-206-35
b. Disassembly and Reassembly.
4-38. Clutch, Boom Hoist, Swing, Hoist, and Digging
(1) Remove fluid passage bolt (6, fig. 4-22),
Brake Compensators
washer (7), fitting (8), and gasket (9), from cylinder (4).
(2) Remove bleeder valve (5) from cylinder (4).
a. Removal and Installation. Remove or install
(3) Remove the two pistons (1), and cups (2),
compensators from lever stand (TM 5-3810-206-12).
from cylinder (4).
b. Disassembly and Reassembly.
(4) Remove return spring (3) from cylinder (4).
(1) Remove rod (1, fig. 4-23) from bellows (2),
(5) Reassemble by reversing steps (1) through
then remove bellows (2) from body (17).
(4) above.
(2) Remove ring (3), washer (4), ring (5), cup
c. Cleaning, Inspection, and Repair.
Refer to
(6), piston (7), cup (8), and spring (9) from body (17).
(3) Remove fluid passage bolt (21), washer
similar manner.
(20), fitting (19), and washer (22) from body (17).
KEY to fig. 4-23:
1
Rod
7
Piston
13
Bleeder screw
18
Pipe plug (2 rqr)
2
Bellows
8
Cup
14
Washer
19
Fitting
3
Ring
9
Spring
15
Cap
20
Washer
4
Washer
10
Pipe plug
16
Washer
21
Fluid passage bolt
5
Ring
11
Valve
17
Body
22
Washer
6
Cup
12
Washer
Figure 4-23. Clutch boom hoist, swing, hoist, and digging brake compensators, exploded view.
4-32
