TM 5-3810-206-35
(4) Remove plug (11), washer (12), and two
c. Cleaning, Inspection, and Repair.
Refer to
plugs (18) from body (17).
(5) Remove bleeder screw (13), washer (14),
brakedrum hydraulic cylinder in a similar manner.
cap (15), and washer (16) from body (17).
(6) Reassemble by reversing steps (1) through
4-40. Propel Brake and Planetary Boom Hydraulic
(5) above.
Compensator
c. Cleaning, Inspection, and Repair.
Refer to
a. Removal and Installation. Remove or install the
compensators in a similar manner.
hydraulic compensator (TM 5-3810-206-12).
b. Disassembly and Reassembly.
4-39. Jackshaft and Brake Drum Hydraulic Cylinder
Remove boot (2) from body (10).
a. Removal and Installation. Remove or install
(2) Remove wire (3), washer (4), ring (5), cup
jackshaft and brakedrum hydraulic cylinder (TM 5-3810-
(6), piston (7), cup (8), and spring (9) from body (10).
206-12).
(3) Remove bleeder valve (11) and three plugs
b. Disassembly and Reassembly.
(16) from body (10).
(4) Remove screw (15), washer (14), cap (13)
and screw (3) from body (4).
and washer (12) from body (10).
(2) Remove fluid passage bolt (13), washer
(5) Remove fluid passage bolt (17), washer
(14), connector (15), and gasket (16) from body (4).
(18), fitting (19), and gasket (20) from body (10).
(3) Remove the two lockwires (5), link (11), and
(6) Reassemble by reversing procedure in steps
bellows (12) from body (4).
(1) through (5) above.
(4) Remove piston (10) from body (4).
c. Cleaning, Inspection, and Repair.
Refer to
(5) Remove screw (6), lockwasher (7), cup (9),
and cup (8) from piston (10).
hydraulic compensator in a similar manner.
(6) Reassemble by reversing steps (1) through
(5) above.
1
Screw
5
Lockwire (2 rqr)
9
Cup
13
Fluid passage bolt
2
Lockwasher
6
Screw
10
Piston
14
Washer
3
Screw
7
Washer
11
Link
15
Connector
4
Body
8
Cup
12
Bellows
16
Gasket
Figure 4-24. Jackshaft and brakedrum hydraulic cylinder, exploded view.
4-33