1
Screw, cap, 5/8-18 x 13/4 in. (6 rqr)
3
Flywheel
5
Flywheel housing
2
Washer, lock, 5/8 in. (6 rqr)
4
Ring gear
Figure 73. Carrier engine flywheel, ring gear, and flywheel housing, exploded view.
276.
Carrier Engine Timing Gears Cleaning and
275.
Carrier Engine Timing Gears Removal
Inspection
a. Remove the carrier engine assembly (par. 46).
b. Remove the fan and fan belts (TM 58810-207-
a. Clean all parts with an approved cleaning solvent
20).
and dry thoroughly.
c. Remove the fuel pump (TM 5-3810-20720).
b. Inspect all parts for excessive wear or damage.
d. Remove the accessory drive (par. 223).
Replace all defective parts. Always replace gears in
e. Remove the oil pump (par. 251).
pairs.
f. Remove the flywheel housing (par. 267).
g. Remove the cylinder head and valves (par. 243).
277.
Carrier Engine Timing Gears Installation
h. Remove the vibrator damper and pulley (par.
a. Install the carrier engine timing gears as
i. Remove the carrier engine timing gears as
illustrated on figure 76.
instructed on figure 76.
b. Install the vibrator damper and pulley (par. 273).
c. Install the cylinder head and valves (par. 245).
TAGO 5030A
128
