Figure 70. Crane batteries, cables, and box, removal and installation.
c. Cleaning and Inspection. Clean and inspect the
starter solenoid (para. 101).
129. Starter Assembly
a. Removal and Installation. Remove and install
the starter assembly in a similar manner as described in
b. Cleaning and Inspection. Clean and inspect the
starter (para. 102).
c. Brush Replacement. Replace starter brushes in
a similar manner as described in paragraph 102.
130. Batteries, Cables and Battery Box
a. Test.
Test the batteries as described in
b. Removal and Installation. Remove and install
the batteries, cables and battery box as shown in figure
c. Cleaning, Inspection and Repair.
(1) Clean all parts and inspect for defects.
(2) Replace defective parts.
Figure 71. Crane engine generator belt, adjustment,
131. Generator Drive Belt
removal and installation.
belt as shown in figure 71.
b. Removal and Installation. Remove and install the
drive belt as shown in figure 71.
c. Cleaning and Inspection.
(1) Clean the drive belt with a cloth dampened
AGO 6819A
109
