with an approved cleaning solvent.
(2) Inspect the drive belt for cracks, breaks,
and frayed or stretched condition.
Replace a defective drive belt.
132. Generator Assembly
a. Removal and Installation. Remove and install
the generator assembly in a similar manner as
described in paragraph 105.
b. Cleaning and Inspection. Clean and inspect the
generator (para. 106).
described in paragraph 105.
133. Generator Brushes
a. Removal and Installation. Remove and install
the generator brushes in a similar manner as described
b. Cleaning and Inspection. Clean and inspect
brushes (para. 105).
Figure 72. Instrument panel and components, removal
and installation.
134. Generator Regulator
a. Removal and Installation. Remove and install
the generator regulator in a similar manner as described
b. Cleaning and Inspection. Clean and inspect the
generator regulator (para. 106).
described in paragraph 106.
135. Instrument Panel Components
a. Removal and Installation. Remove and install
instrument panel components as instructed in figure 72.
b. Cleaning and Inspection. Clean and inspect.
Replace damaged or defective instrument panel
components.
136. Oil Pressure Sending Unit, Safety Switch, and
Pressure Switch
a. Removal and Installation. Remove oil pressure
sending unit, safety switch, and pressure switch as
Figure 73. Oil pressure sending unit, abets witch, and
shown in figure 73.
oil pressure switch, water temperature sending unit,
b. Cleaning and Inspection. Clean and inspect.
removal and installation.
Replace defective sending unit or switch.
137. Water Temperature Sending Units
a. Removal and Installation. Remove and install the
water temperature sending units as shown in figure 73.
b. Cleaning and Inspection.
Clean and inspect.
Replace defective sending units.
AGO 5819A
110
