(1) Install the hydraulic steering pump belt in the
reverse of the numerical sequence as
illustrated on figure 79.
Figure 80. Carrier engine fan, removal and installation.
(2) Install the three fan belts on the generator
and crankshaft pulley in the reverse of the
numerical sequence as illustrated on figure
Figure 79. Fan belts and hydraulic steering pump
belt, removal and installation.
(3) Adjust the hydraulic steering pump and fan
belts (fig. 53).
Draincocks are located on the bottom of the water pump
146. Fan
and at the lower-right, rear side of the engine block.
a. Removal.
Remove the carrier engine fan as
instructed on figure 80.
145. Fan Belt and Hydraulic Steering Pump Belt
b. Cleaning and Inspection.
a. Removal.
(1) Clean all parts with an approved cleaning
(1) Remove the three fan belts from the
solvent.
generator and crankshaft pulley in
(2) Inspect all parts for cracks, breaks, and other
numerical sequence as instructed on
damage. Replace defective fan.
c. Installation.
Install the carrier engine fan as
(2) Remove the hydraulic steering pump belt
illustrated on figure 80.
in numerical sequence as instructed on
147. Radiator Shroud
b. Cleaning and Inspection.
a. Removal.
(1) Clean belts with a cloth dampened with an
approved cleaning solvent.
(1) Drain the cooling system.
(2) Inspect belts for fraying, breaks, cracks,
(2) Remove the carrier engine fan (para. 146).
and other damage. Replace belts as
(3) Remove the carrier engine radiator shroud as
necessary.
instructed on figure 81.
c. Installation.
b. Cleaning and Inspection.
(1) Clean all parts with an approved cleaning
solvent.
AGO 6819A
113
