481. Carrier Air Compressor Assembly Reassembly
and Installation
assembly as illustrated on figure 242.
a. Reassembly.
Reassemble the carrier air
compressor assembly in the reverse of the numerical
sequence as illustrated on figure 248.
Section XLIX. CARRIER FRONT AIR BRAKE CHAMBER ASSEMBLY
482. General
The carrier's two front air brake chamber assemblies each
484. Carrier Front Air Brake Chamber Assembly,
consist basically of two circular housings or plates, a push
Cleaning, Inspection and Repair
rod assembly, and a diaphragm. The purpose of the
a. Cleaning. Clean all parts with an approved cleaning
brake chambers is to convert the energy of the
solvent and dry thoroughly.
compressed air into mechanical force and motion
b. Inspection and Repair. Inspect all parts for excessive
necessary to operate the front brakes. When the air
wear or damage. Replace or repair all defective parts.
pressure is released from the brake chamber, a spring
returns the diaphragm and push rod assembly to the
485. Carrier Front Air Broke Chamber Assembly,
released position.
Reassembly and Installation
a. Reassembly. Reassemble the carrier front air brake
483. Carrier Front Air Brake Chamber Assembly
chamber assembly in the reverse of the numerical
Removal and Disassembly
sequence as illustrated on figure 244.
a. Removal. Remove the carrier front air brake chamber
b. Installation. Install the carrier front air brake chamber
assembly (para. 234).
assembly (para. 284).
b. Disassembly. Disassemble the carrier front air brake
chamber assembly in numerical sequence as illustrated
on figure 244.
Figure 244. Carrier front air brake chamber assembly, exploded view.
Section L. CARRIER REAR AIR BRAKE CHAMBER ASSEMBLY
push rod assembly, and a diaphragm. The purpose of the
486. General
brake chambers is to convert the energy of com-
The carrier's four rear air brake chamber assemblies each
consist basically of two circular housings called plates, a
AGO 6819A
276
