TM 5-3810-231-12
Figure 39. Thermostat housing and thermostat,
removal and installation.
(3) Remove the water pump assembly as
instructed in figure 41.
b. Cleaning, Inspection and Repair.
(1) Clean all parts in an approved cleaning
Figure 38. Cooling system hose, lines and fittings,
solvent and dry thoroughly.
removal and installation.
(3) Inspect for cracks, breaks, or other
damage. Replace all damaged parts.
d. Installation. Refer to figure 39 and install the
thermostat and thermostat housing.
82. Fan Guard and Fan
a. Removal. Remove the fan guard and fan as
instructed in figure 40.
b. Cleaning, Inspection and Repair.
(1) Clean all parts in an approved cleaning
solvent and dry thoroughly.
(2) Inspect for cracks, breaks, and other
damage.
(3) Replace damaged or defective parts as
necessary.
c. Installation. Install the fan and fan guard as
instructed in figure 40.
83. Water Pump
a. Removal.
(1) Drain the cooling system.
(2) Remove fan guard and fan (para 82).
Figure 40. Fan guard and fan, removal and
installation
73
