a. Reassembly.
Refer to figure 3-35 and
3-59. Cleaning, Inspection and Repair
reassemble oil pan assembly.
a. Clean all parts with an approved cleaning solvent
b. Installation.
and dry thoroughly.
(1) Install oil pan assembly as illustrated on
b. Inspect oil pan for cracks, breaks, and general
condition. Repair or replace a defective oil pan.
(2) Refill with engine oil (refer to lubrication
c. Inspect capscrews and drain plugs for damaged
order).
threads. Replace damaged or defective parts.
NOTE
Torque oil pan capscrews to 26-30 ft-lbs.
3-60. Reassembly and Installation
Section XX. CARRIER ENGINE LUBRICATING OIL PUMP
(2) Remove oil pump as illustrated on figure
3-61. Removal and Disassembly
a. Removal.
(1) Remove oil pan assembly (para 3-58)
Figure 3-36. Carrier engine lubrication oil pump, removal and installation.
3-58
