B-Checking main bearing cap to block clearance
Figure 3-45. (2) --Continued.
g Check clearance between main bearing cap and
block at side bolt contact area on each side of cap as
shown on figure 3-45. Clearance must be 0.015,10.0035
inch.
h Lubricate threads and install main bearing cap
side bolts and washers.
i Tighten side bolts to 70-75 ft-lbs in 35-40 ft-lbs
increments using a sequence on figure 3-46.
Figure 3-46. Carrier engine main bearing side bolt
tightening sequence.
3-68
