TM 5-3810-294-34
1.
DISCONNECT HYDRAULIC LINE AND PLUG LINE.
2.
REMOVE SWIVEL.
3.
REMOVE BEARING RETAINER CAPSCREWS AND LOCK WASHERS ON SWIVEL END. REMOVE RIGHT
BEARING RETAINER.
4.
REMOVE BEARING CAP NUTS AND LOCK WASHERS ON RIGHT SIDE. REMOVE BEARING CAP.
5.
REMOVE BEARING RETAINER CAPSCREWS AND LOCK WASHERS ON LEFT END.
REMOVE LEFT
BEARING RETAINER.
6.
REMOVE BEARING CAP NUTS AND LOCK WASHERS ON LEFT END. REMOVE BEARING CAP.
7.
REMOVE DRUM SHAFT ASSEMBLY.
ME 3810-288-35/2-7
Figure 2-7. Front drumshaft assembly, removal and installation.
2-25
