TM5-3810-305-10
b.
c.
Align upperstructure parallel to carrier
with boom tip to rear and counterweight to
front (Figure 5-25).
Keep arms and hands from under
upperstructure. Failure to follow
this procedure could cause
SERIOUS INJURY.
d.
Install canvas bag, located in tool box,
around and under base plate of upperstruc-
ture. Pull drawstring tight and tie.
I
CAUTION
Keep all hoses out of the way
when lowering upperstructure.
Make sure the winch extension
hoses are not pinched against the
outrigger beam as the upperstruc -
ture is lowered. This could result
in damage to the extension hoses.
Lower upperstructure until just short of
touching ground.
Figure 5-25 Lowering the Upperstructure
5-1
9
