TM5-3810-305-10
f.
g.
h.
i.
Install sheave (14) back in clevis on lift
arm (16). Index sheave pin (13) and lock
sheave bracket (15) to side of lift arm ( 16).
Maintain tension on cable and remove
wooden wedge from winch drum.
Start engine. Hold on anti-two block BY-
PASS switch and use winch to pull loose
cable down snug against boom, from
boom head to winch. Stop as soon as all
slack is removed from cable.
Shut engine off.
5. Remove and stow mast (3) as follows:
a. Remove two truss rods (10) from mast (3,
Figure 5-11.
Figure 5-11A). Stow truss rods (10) and
adjustable truss rod (11) in storage loca-
tion A (Figure 5-11) on upperstructure.
Storage Locations A and B
Figure 5-11A. Installing the Truss Rods
5-23
