TM 5-3810-305-23
0030
REMOVAL
NOTE
There are two separate procedures for removing rear seal. One is with flywheel housing
installed and one is with flywheel housing removed.
Steps 1 through 3 are for removal of rear seal with flywheel housing installed.
Steps 4 through 7 are for removal of rear seal with flywheel housing removed.
1.
Remove flywheel (Figure 1, Item 1) (WP 0029).
2.
Drill two holes 180 degrees apart to relieve tension on rear seal (Figure 1, Item 2).
1
2
M0040105
Figure 1. Rear Seal Removal.
3.
Remove rear seal (Figure 2, Item 1) from flywheel housing (Figure 2, Item 2).
1
2
M0041105
Figure 2. Rear Seal Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00035)