TM 5-3810-305-23
0030
INSTALLATION - Continued
4.
Install flywheel housing (Figure 5, Item 2) (WP 0029).
CAUTION
Drive rear seal alternately at the 12, 3, 6 and 9 o'clock positions to prevent bending rear cover.
NOTE
Steps 5 through 7 are for installation of rear seal with flywheel housing installed.
Use a mild soap on inside diameter of rear seal for easier installation. DO NOT use any
kind of sealant on rear seal.
5.
Using a seal starter, install rear seal (Figure 5, Item 1) on flywheel housing (Figure 5, Item 2).
6.
Using a seal driver, drive rear seal (Figure 5, Item 1) on crankshaft until seal driver bottoms.
7.
Install flywheel (WP 0029).
1
2
M0041105
Figure 5. Rear Seal Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect battery cables (WP 0076).
2.
Place boom in resting position (TM 5-3810-305-10).
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00035)