TM 5-3810-305-23
0030
REMOVAL - Continued
4.
Remove flywheel housing (WP 0029).
5.
Remove six capscrews (Figure 3, Item 1), rear cover (Figure 3, Item 2), and gasket (Figure 3, Item 4) from
block (Figure 3, Item 3). Discard gasket and remove all gasket material from mounting surfaces.
6.
Support rear cover (Figure 3, Item 2) on a suitable work stand.
7.
Remove rear seal (Figure 3, Item 5) from rear cover (Figure 3, Item 2).
1
5
2
4,3
M0042105
Figure 3. Rear Seal Removal.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00035)