TM 5-3810-305-23
0031
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
1.
Inspect parts IAW General Maintenance Instructions (WP 0162).
2.
Inspect rocker levers for cracks and wear in bore and contact surface of valve stem.
M0026105
Figure 5.
Rocker Lever and Push Rods Inspection.
3.
Measure diameter of rocker lever bore. Diameter of bore should measure 0.7480 inch (18.999 mm) minimum
and 0.7500 inch (19.050 mm) maximum.
M0027105
Figure 6.
Rocker Lever and Push Rods Inspection.
03/15/2011Rel(1.8)root(maintwp)wpno(M00036)
