TM 5-3810-305-23
0031
INSPECTION - Continued
4.
Inspect rocker shaft support assembly for wear on shaft.
5.
Measure diameter of shaft. Diameter of shaft should measure 0.7456 inch (18.938 mm) minimum and
0.7470 inch (18.974 mm) maximum. Replace rocker shaft support assembly when shaft measurement is not
within minimum/maximum tolerance.
M0028105
Figure 7.
Rocker Lever and Push Rods Inspection.
END OF TASK
ASSEMBLY
1.
If removed, install rocker adjustment screws (Figure 8, Item 2) and adjusting nuts (Figure 8, Item 1) on intake
and exhaust rocker levers (Figure 8, Item 3).
1 2
3
3
M0025105
Figure 8. Rocker Lever and Push Rods Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00036)
