TM 5-3810-305-23
FIELD MAINTENANCE
VALVE COVERS AND GASKET MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
O-Ring (WP 0172, Table 1, Item 75) Qty: 4
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
Wrench, Torque, Click, Ratcheting 3/8 Inch Drive,
75 ft-lb (WP 0171, Table 1, Item 36)
References
Materials/Parts
Cleaning Compound, Solvent, Type III (WP 0170,
Equipment Condition
Table 1, Item 9) Qty: 1
Boom in horizontal position and fully retracted (TM
Gasket (WP 0172, Table 1, Item 58) Qty: 4
5-3810-305-10)
Sliding engine hood removed (WP 0118)
REMOVAL
Remove four capscrews (Figure 1, Item 2), o-rings (Figure 1, Item 3), valve covers (Figure 1, Item 1), and
gaskets (Figure 1, Item 4). Remove all gasket material from mounting surfaces. Discard o-rings and gaskets.
3
2
4
1
M0014105
Figure 1.
Valve Covers Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00040)