TM 5-3810-305-23
0036
INSTALLATION - Continued
NOTE
Steps 1 through 3 are the procedures for installation of new front seal with front cover installed.
1.
Apply sealing compound to outside diameter of front seal (Figure 2, Item 1).
2.
Using a seal starter ring, install new front seal (Figure 2, Item 1) on front cover (Figure 2, Item 2).
3.
Install crankshaft pulley. Refer to Crankshaft Pulley Maintenance (WP 0028).
CAUTION
Drive front seal alternately at the 12, 3, 6, and 9 o'clock positions to prevent damage to
seal carrier.
NOTE
Steps 4 and 5 are for installation of new front seal with front cover removed.
4.
Using a seal driver, install new front seal (Figure 2, Item 1) on front cover (Figure 2, Item 2).
5.
Install new front seal (Figure 2, Item 1) in cover (Figure 2, Item 2) with front cover removed. Refer to
Front Gear Cover and Gasket Maintenance (WP 0032).
1
2
M0039105
Figure 2. Front Seal Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect battery cables (WP 0076).
2.
Place boom in resting position (TM 5-3810-305-10).
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00041)