TM 5-3810-305-23
0044
INSTALLATION - Continued
12.
Install fuel injection pump capscrew (Figure 34, Item 2) on fuel injection pump (Figure 34, Item 1) to rear bracket
(Figure 34, Item 3).
1
2
M0272105
3
Figure 34.
Injection Pump Installation.
13.
Tighten three flange nuts to 18 ft-lb (24 Nm).
14.
Tighten rear bracket capscrew to 18 ft-lb (24 Nm).
15.
Loosen injection pump driveshaft lockscrew.
16.
Reposition locked timing seal to unlocked position.
17.
Tighten injection pump driveshaft lockscrew to 7 ft-lb (10 Nm).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install fuel injection tubes (WP 0049).
2.
Install front cover (WP 0032).
3.
Connect battery cables (WP 0076).
4.
Place boom in resting position (TM 5-3810-305-10).
5.
Check for proper operation.
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)