TM 5-3810-305-23
0044
INSTALLATION - Continued
7.
Install injection pump drive gear (Figure 32, Item 1) onto driveshaft, aligning keyway in injection pump drive
gear with key in shaft and aligning mark on injection pump drive gear with timing mark on camshaft gear.
8.
Install new lockwasher (Figure 32, Item 3) and drive gear mounting nut (Figure 32, Item 2) on injection pump
drive gear (Figure 32, Item 1).
9.
Tighten nut to 11 to 15 ft-lb (15 to 20 Nm).
2
1
3
M0271105
Figure 32.
Injection Pump Installation.
10.
When installing previously removed injection pump, align matchmarks.
11.
When new or rebuilt injection pump is installed, align injection pump mounting flange (Figure 33, Item 1) mark
to gear housing (Figure 33, Item 2) mark.
1
M0288105
2
Figure 33.
Injection Pump Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)