TM 5-3810-305-23
0044
ASSEMBLY - Continued
18.
Install new o-ring (Figure 26, Item 6), spring (Figure 26, Item 5), and solenoid with plunger (Figure 26, Item 4)
in injection pump (Figure 26, Item 2). Tighten solenoid to 11 ft-lb. (15 Nm).
19.
Install four fittings (Figure 26, Item 7), eight new copper washers (Figure 26, Item 3), and four banjo bolts
(Figure 26, Item 1) on injection pump (Figure 26, Item 2). Tighten four banjo bolts to 23 ft-lb (31 Nm).
2
1
7
5,6
3
4
M1510105
Figure 26. Injection Pump Assembly.
20.
Install new o-ring (Figure 27, Item 2) on driveshaft lockscrew (Figure 27, Item 1).
1
2
M1509105
Figure 27. Injection Pump Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)
