TM 5-3810-305-23
0049
INSTALLATION - Continued
Low-Pressure Tubes - Continued
4.
Install four new copper seals (Figure 13, Items 1 and 3), two banjo fittings (Figure 13, Items 2 and 4), and two
banjo screws (Figure 13, Items 7 and 8) to filter head. Tighten two banjo fittings to 18 ft-lb (24 Nm).
5.
Connect two fuel pressure sender hoses (Figure 13, Items 5 and 6) to banjo fittings
(Figure 13, Items 7 and 8).
1
4
2
3
5
8
6
7
M0262105
Figure 13. Low-Pressure Tubes Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00055)