TM 5-3810-305-23
0050
REMOVAL - Continued
2.
Remove preformed packing (Figure 2, Item 1), hexagon nut (Figure 2, Item 2), fuel filter head
(Figure 2, Item 4), and o-ring (Figure 2, Item 3). Discard o-ring and preformed packing.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSTALLATION
1.
Install new o-ring (Figure 2, Item 3), fuel filter head (Figure 2, Item 4), new preformed packing
(Figure 2, Item 1), and hexagon nut (Figure 2, Item 2) to engine. Tighten hexagon nut to 24 ft-lb (33 Nm).
3
2
1
4
M0247105
Figure 2. Fuel Filters and Head Assembly Maintenance.
03/15/2011Rel(1.8)root(maintwp)wpno(M00056)